First of all, you need to verify how and why the sound is getting through to the neighboring premises. There are many possibilities – walls, floor, ceiling, façade, ceiling beams, structural pillars, ventilation, plumbing, electrical installation, etc. After the acoustic measurements have been taken and analyzed, we are able to advise about the most optimal acoustic solutions in terms of efficiency and costs. We also provide substantive and legal assistance in conducting conversations with neighbours or other entities.

Yes, we have many years of experience in the selection of audio systems. Guided by acoustic conditions in a given room, we select the appropriate speakers, subwoofers, amplifiers, mixers, sound sources, cabling and control systems. We also perform computer acoustic simulations of the sound system in a model room. This all allows us to verify the effectiveness of the planned system before making a decision about its purchase.

Yes, the right setting and tuning of the sound system has a major impact on the sound quality. In addition to tuning, we choose the appropriate vibro-insulation elements for columns and subwoofers, which reduce noise transmission to neighboring premises. When neighbours complain about the noise, it is also worth using a DSP processor with frequency correction and loudness limiter, which will reduce the impact of the most problematic frequencies.

Good acoustics in the premises will improve our comfort when conducting conversations, listening to music or eating meals. The reduction of noise and reverberation time in our premises will make customers feel better, and thus more willingly visit us. The use of acoustic panels and damping mats is recommended in places such as music clubs, restaurants, cafes, pubs, canteens or shops.

Yes, acoustics are closely related to interior design, therefore, in addition to acoustics, we employ architects who help us create a comprehensive project. Its scope is agreed each time with the investor and may include various fields such as: the visual concept, equipment, furniture, lighting, sound system, etc.

Yes, we always work with an architect in such situations. We try to ensure that all acoustic elements match the given visual concept. We choose the appropriate materials and technologies for the production of acoustic panels. Acoustic adaptation should be as discreet as possible and be an integral part of the interior design.

Planning a studio should start with the choice of the right location. A large amount of space for insulation and acoustic adaptation, the possibility of any arrangement of space, appropriate proportions and size of rooms, quiet neighborhood – these are things that will make the studio easier for us at the beginning. After choosing the premises, an appropriate studio project should be developed, taking into account all sectors involved in the project.

We may not realize how many unwanted sounds reach our ears on a daily basis. It is only during the recording process that we discover that even the quietest of noises, registered by the microphone can make our work more difficult. It should also be ensured that the recordings (lasting until late at night) do not disturb our neighbours.

Just like in the case of the guitar resonance box, each room has its own sound characteristics. Acoustic panels are responsible for shaping sound in our studio. Reflections of sound from the walls, ceiling or floor cause phase shifts, relative to the sound that reaches us directly from the source. This causes us to hear distortions at some frequencies. To prevent this, we use panels and bass traps, which are adapted to the characteristics of the room.

We start the design process from acoustic measurements and an inventory of the premises. Then we prepare the room model and acoustic simulations. Based on our analyzes and arrangements with the investor, we prepare a project for different elements: acoustic adaptation /insulation, electrics, electroacoustics, HVAC, interior design. At the end, we create the 3D visualization of rooms, a valuation and we set a schedule of execution works.

To check if there are good acoustic conditions in the studio, the appropriate acoustic measurements should be conducted. In addition to objective parameters such as impulse response, reverberation time, clarity, we also define subjective parameters, e.g. intimacy, warmth or scattering of sound. For each measurement analysis, we enclose guidelines and tips on what to improve and how to achieve the desired effect.

Yes, the implementation and installation of acoustic insulation /adaptation or audio systems requires high precision. That is why we employ experts who specialize in complicated and untypical realizations. Thanks to this, we take full responsibility for the effectiveness of our solutions and we guarantee that everything has been done in accordance with the project.

Yes, we can make acoustic panels based on the provided project or make only the project yourself. It is also possible to supervise the implementation of the project. In the case of self-assembly, we provide the necessary technical documentation and instructions. In the case of the installation of advanced acoustic insulation, supervision is recommended, because any error may cause sound leaks in the partition.

The Nyquista range consists of standard acoustic panels and insulation mats as well as custom-made solutions. Our experience in designing various types of rooms (offices, clubs, restaurants, recording studios, cinemas, theaters) allows us to draw inspiration and create unique acoustic solutions tailored to the requirements of a specific facility.

Yes, we often make personalized panel designs. Each project is a new challenge for us. We are happy to cooperate with designers, architects and all who have interesting ideas. We are also constantly testing new acoustic materials and looking for innovative production technologies.

Our acoustic projects usually require an individual approach. Therefore, we do not have a fixed price list. Each valuation is prepared separately, depending on a variety of factors such as size and the complexity of the project. If you need a quote, contact us and we will certainly provide you with the necessary information.

All acoustic panels and mats are manufactured at the Nyquista factory, located near Warsaw. We have our own machine park, paint shop and carpentry shop. Thanks to this, we control the entire production process ourselves.

In order to become acquainted with our offer, we invite you to our showroom, which is located in Warsaw or contact us by email / telephone. We are more than happy to answer all your questions and concerns.